COEF MP 700 ZOOM Operations Instructions download pdf (Page 15)

http://www.coef.net - [email protected] Pag. 15

10.2 ELETTRONIC MAINTENANCE

This section is dedicated in detail to the electronic connections between the card and the mecha

nical components, assembled in the projector. These informations will be absolutely necessary when

the mechanical unit has to be removed from the projector for maintenance and/or repair.

The connections are made using handy connectors and are detailed in figure where you can find indications

about the connection between a specific connector and a specific component of the mechanical unit. This includes

the motors and the sensors of the various effects wheels ( color, gobos, prisms, shutter etc.).

WARNING!

An improper use of this documentation made by not specifically qualified staff can damage

irremediably the electronic and/or mechanical components of the projector.

Motor SHUTTER / STROBE 15 Sensor PAN

2 Motor COLORE wheel 16 Sensor TILT

3 Motor GOBOS wheel 17 S1 Sensor COLOR wheel

4 Motor GOBOS Rotation 18 S2 Sensor GOBOS wheel

5 Motor EFFECTS wheel 19 S3 Sensor GOBOS Rotation

6 Motor ZOOM 20 ON/OFF Lamp (only Magnetic Ballast version)

7 Motor FOCUS 21 Electronic Ballast connector

8 Motor CONVERSION FILTERS 22 LIGHT Sensor / NTC Sensor

9 Motor IRIS 23 POWER Connector

10 Motor PRISM Rotation 24 Faston GROUND connection

11 Motor TILT 25 DMX IN/OUT

12 Motor PAN 26 Head FAN

13 Encoder TILT 27 Base FAN

14 Encoder PAN

WARNING: switch off the projector before operating

23 - Power connector on board

1-2 12V~ +/- 5% Blue

3-4 27V~ +/- 5% Grey

5-6 27V~ +/- 5% Black

1 2 ... 10 11 12 13 14 15 16

No comments

COEF MP 700 ZOOM Operations Instructions Page 15