COEF PERFORMANCE 250DV DV User Manual Page 43
- Page / 129
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
ScancommanderScancommander
ScancommanderScancommander
Scancommander
eMail: [email protected]
.
Tel.: +49 931 497940
.
User's Manual Scancommander
4343
4343
43
6.2 Playback of sequences
A sequence is started by its respective button like any other memory.
By any memory or chaser, recalled by its respective button after the start of
the sequence, the sequence may loose its priority. If the memory was a
selective one, some of the channels may still be available for the sequence, if
it was a standard memory with fully selected STORE MATRIX, the following
steps of the sequence will no longer have any effect on stage.
A red LED in one of the STEP MODE buttons indicates, how the next step has
to be recalled. The internally stored step mode is indicated by the green
LED´s, but has no effect as long as a red one is on.
Green LED´s: Only if none of the red LED´s is on, the next step is triggered by
the internally stored step mode.
GO+ and GO- buttons are always working, like the EXTERN GO input via
1/4" jack on the back panel does.
SET TIME LED: if the LED is on, the x-fade time between the steps can be set
by the fader. The internally stored x-fade time of the steps has no effect.
6.2.1 Playback of a sequence by GO button
"GO BUTTON" Step Mode selected
(red LED on)
SEQUENCE button 1-16
The LED in the button shows the selected sequence..
GO+ button
Recalls the first step of the sequence
GO+
GO+
Recalls the steps one by one.
GO- button
Recalls the previous step.
Note: When using standard memories, the GO- but-
ton will really recall the right stage picture. When
using selective programmed steps, recalling a step
via GO- may have another effect than recalling this
step via GO+.
Starting a sequence
Red LED in the Step Mode
buttons
Green LED in the Step
Mode buttons
GO buttons
Set Time LED
Sequence via GO button
- SCANCOMMANDER 1
- Contents 2
- 1.1 General remarks 5
- 1.3 Installation 6
- 1.2 Specifications and extras 6
- 2. Setup 7
- 2.2 Lamp type 8
- DMX MOVEMENT 10
- SCAN Selection 10
- CHANGE PAN<>TILT 10
- INVERT PAN or INVERT TILT 10
- ! Attention ! 12
- ! STORE ! 12
- 3.2.1 Tuning with the encoder 14
- 3.2.2 Programming of presets 15
- 3.2.3 Playback of presets 16
- 3.3 Movements 18
- Transforming programs to 20
- Adjusting preset positions 20
- Transforming direct DMX 20
- 3.3.4 Trackball and Mouse 21
- 3.3.5 Followspot mode 21
- 3.3.7 Movement speed 23
- 4. Memories 24
- 4.2 Playback memories 26
- 4.2.5 Display of Memory Names 28
- 4.3 Selective memories 29
- 4.4 Modifying of memories 31
- 4.4.3 Copying memories 32
- 5. Chaser 33
- 5.2 Playback chasers 35
- On Line changing of the 36
- 6. Sequences 40
- 6.2 Playback of sequences 43
- 6.2.6 Enable Sequence 45
- 6.2.7 Sequence playback menu 46
- Changing channel values 50
- Testing single steps 50
- 7. REMOTE 52
- 7.1 Remote via Touchboard 53
- 7.2 Remote via DMX input 54
- DMX 23 54
- 7.3 MIDI 55
- 7.4 Master-Slave Operation 56
- 7.5 SMPTE TIME CODE 57
- 00:00:01:15 58
- 00:00:12:23 59
- 7.5.3 Time Code Playback 60
- 00:00:12:15 61
- INSERT NOT POSSIBLE 62
- 8. Dimmer and color changers 64
- 8.4 EXTRA presets 65
- !! ATTENTION !! 66
- 9. Utilities 67
- 9.2 Storage of programs 68
- 9.3 Clearing programs 70
- 9.4 Keyswitch 70
- 9.5 Macros 71
- 9.5.2 Macro user examples 72
- 10. Inputs and outputs 73
- ATTENTION!! 74
- 11. Defining your own Scans 75
- CHAN. 1 GOBO 2 76
- CHANNEL DIMMER 77
- BRIGHTNESS: 77
- Appendix 1: 89
- Manufacturer CLAY PAKY 90
- Manufacturer COEMAR 94
- Manufacturer FLY 100
- Manufacturer FUTURELIGHT 100
- ScancommanderScancommander 101
- Scancommander 101
- Manufacturer GLP 102
- Manufacturer LAMPO 106
- Manufacturer LICHT TECHNIK 106
- Manufacturer LITEBEAM 106
- Manufacturer SAGITTER 114
- Manufacturer SUMMA 118
- Standard COLOR CHANGER 122
- 3. DMX address 124
- Tel.: +49 931 497940 125
- 6. Homing function 126
- Safety Instructions: 128
- DECLARATION OF CONFORMITY 129
Related products and manuals for Floodlights COEF PERFORMANCE 250DV DV
(129 pages)
Floodlights COEF MP250 FRESNEL User Manual
(20 pages)
(20 pages)
Floodlights COEF EMULATION WRGB User Manual
(131 pages)
(131 pages)
© 2020, manymanuals.com. All rights reserved. | 0.632 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals